Fusion Splicer Inno IFS-55

Rp 22.000.000(Baru)

Features :
Automated and programmable wind protector
6 seconds Splicing Time;14-second automated tube heater
Fully ruggedized for shock, dust and moisture,
Li-Ion battery with 230 splices/shrinks per charge
5 mm cleave length for splice on connector or small package needs

Sheath clamp or fiber holder operation
On-board training and support videos
Internet software upgrades

Multi-function transit case with integrated workstation

Mode number : Korea IFS-55 Fusion splicer/fiber splicing machine
Applicable Fibers : Single mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655),BIF/UBIF(G.657)
Cladding Diameter : 80 m to 150 m
Coating Diameter : 100 m to 1,000 m
Fiber Cleave Length : 5 to 16 mm ; 10-60mm
Typical Average Splice Loss : 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time : SM FAST mode-6seconds Pyrocondensation Time-14seconds
Arc Calibration Method : Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes : 100 preset and user programmable modes
Splice Loss Estimate : Based upon dual camera core alignment data
Storage of Splice Result : Last 2,000 results to be stored in the internal memory
Fiber Display : X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification : X or Y:300 X ;X and Y : 300 X
Viewing Method : Dual cameras with 4.3 inch TFT color LCD monitor
Operating Conditon : 0 to 5,000m above sea level, 0 to 95%RH and-10 to 50C /Max wind velocity of 15M/S
Return loss : >60dB
Pull : 1.96-2.25N
Electrode life : 3000-5000/One pair for Standby application
Weight : 1.5 Kg

Machine Size : 124W123D121H(mm)
Warranty : 2 years warranty and lifespan technology support
Splicing cords : 260 cords /per charge

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *